Developing a Smok Pen
The Smok Pen is a revolutionary vaporizing pen which allows for a write-to-write experience, even while you are abroad. This is because of the unique design of the pen. It has two tanks, one smaller compared to the other, that house the e juice and charged batteries. Once the user wants to write, he just places the pen in to the smaller tank and places the ink in the chamber where it will be vaporized. He simply turns on the pen and writes as though he could be writing under a black mirror.
One of the biggest attributes of the Smok Pen is its capability to charge while it is on your own desk. This is due to the coils on the Smok Pen are designed in a way to keep the e juice from dripping onto the table or anywhere else. This is due to the 0.3-ohm coil that’s placed inside the Smok Pen. The 0.3-ohm coil means that even the slightest of air currents will not affect the writing process. Simply because the electronic circuitry has protection built in so that it will not be suffering from extremely low voltage electric currents.
The Smok Pen can be charged internally with a charger or via the USB connection that comes with it. Because the electronic circuitry has a safety barrier built in, this means that there is absolutely no risk involved when charging the device through the computer. podsmall.com The Smok Pen includes a charging capacity of sixteen 50 mah batteries, which is great for all pens that use a couple of batteries.
In order to keep the Smok Pen working for an extended period of time it is important you don’t overcharge the battery. Overcharging the battery will reduce the voltage that’s available and may eventually result in these devices malfunctioning. Overcharging the Smok Pen could also affect the vaporizing process. In the event that you feel that your battery is not getting the vapor it should, remove the pen from the energy source and let it cool down for a few minutes.
The fire button on the Smok Pen is situated at the bottom right corner of the device. The fire button has an orange light, which indicates that it’s on. You can press this button to activate the electronic heating element that may enable you to vaporize the oil. After you have done so you can take away the coil from the holder and stick it in to the holder and place the Smok Pen in to the airflow chamber, that will cause the heating element to start out heating up and burning away the wick.
Once the coil is taken off the holder the airflow chamber is ready for the sub-ohm cartridge. The coils are put inside the holder plus they get heated from the airflow. Once they get hot they start to turn blue, that is the indication that it is ready for the pen’s battery. Ensure that you place your sub-ohm in to the chamber before you push the fire button. If you do not put the coil in to the airflow chamber then the oil will leak and cause the leaking of e-juice.
Before you put the battery in to the pen, you must ensure that you have disconnected all of the leads. Then you need to remove the Smok Pen’s cap and locate the leak or drip tip. You need to clean this with a small cotton bud, so as to eliminate leak. Then reattach the cap back again to the Smok Pen and you will be ready to place the battery in to the pen.
The final part of the construction process may be the adapter plate, which fits in to the Smok Vaporizer’s USB port. This plate allows you to charge your e-juice during your computer, as long as you have an adapter for USB connection. I like this part since it allows me to charge my entire kit at once without fretting about running out of power or constantly running out of e-juice.